Specification Sheet

7-1/2"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzPump:
Technical Information
All product dimensions are nominal.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
Drop-inInstallation:
EndDrain location:
If installing a rim-mount faucet, make sure there
is no interference with drain overflow before
46" x 24" (1168 mm x 610 mm)Basin area, bottom:
54" x 27" (1372 mm x 686 mm)Basin area, top:
drilling any holes. Consult local and national
105 lbs (47.6 kg)Weight:
codes for minimum air gap requirements if
installing a spout on the faucet deck.
44 lbs/ft² (214.8 kg/m²)Minimum floor load:
14" (356 mm)Water depth:
Pump must be relocated to custom position at
the time of installation. Provide adequate
clearance.
63 gal (238.5 L)Water capacity:
Drop-in, 58" x 34" (1473 mm x 864 mm)Cutout:
Pump: 120 V, 7.5 A, 60 HzElectrical component
rating:
SinglePump speed:
2" (50 mm)Minimum flat for door:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-7-2017 05:21
Mariposa
®
5' Whirlpool Bath
K-1239-CB