Specification

K-1601 (Continued) Bath footstop ❑ 0 ❑ Other_____
Technical Information
Fixture*: *Approx. measurements for comparison only.
Basin area,
bottom
46″ (1168 mm) x 24″ (610 mm)
Basin area,
top
54″ (1372 mm) x 27″ (686 mm)
Weight 71 lbs (32.2 kg)
Water depth 14″ (356 mm) to overflow
Capacity 63 gal (238.5 L) to overflow
Amplifier/control: Power per channel V Hz
15 (rms) W 120 50/60z
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD): Amplifier/control, 120 V, 15 A,
50/60 Hz
Installation Notes
Install this product according to the installation guide.
Control amplifier fits 16″ (406 mm) center studs. A grounded
outlet within the wall framing must be within 24″ (610 mm) of
the planned control amplifier. Cables are included, 25’ (7.6 m)
each.
Floor support under bath must provide for a minimum of
41 lbs/square foot (200.2 kg/square meter) loading.
If installing a rim-mount faucet, make sure any plumbing does
not interfere with the drain overflow before drilling any holes.
Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
Ensure that the bath, user interface, amplifier, and
transducers are functional before completing the installation.
5-5/8"
(143 mm)
3-1/2"
(89 mm)
7/8"
(22 mm)
14-1/2"
(368 mm)
11-3/4"
(298 mm)
3-3/16"
(81 mm)
User Interface
Control Amplifier
*Recommended User
Interface Location
*10"
(254 mm)
*24"
(610 mm)
20"
(508 mm)
1-1/2"
Bath Drain
No changes in measurements if connected with
drain illustrated. (K-7161-AF)
Recommended Faucet Area
1-1/4"
(32 mm)
1/2"
(13 mm) R.
36" (914 mm)
1" (25 mm)
3" (76 mm)
2-7/8"
(73 mm)
3-1/2"
(89 mm)
1-1/4"
(32 mm)
8-11/16"
(221 mm)
18"
(457 mm)
60" (1524 mm)
Flange Detail
Lumbar
Angle 33˚
21-1/4"
(540 mm)
Product Diagram
MARIPOSA
®
MARIPOSA
®
5’ VIBRACOUSTIC
®
BATH WITH INTEGRAL APRON
Page2of2
1202542-4-
A