Specification

Technical Information
Fixture*:
Basin area:
Bathing area, bottom 46″ (1168 mm) x 24″ (610 mm)
Bathing area, top 54″ (1372 mm) x 27″ (686 mm)
Weight 111 lbs (50.3 kg)
To overflow:
Water depth 14″ (356 mm)
Capacity 63 gal (238.5 L)
* Approximate measurements for comparison only.
Drop-in cut-out 58″ (1473 mm) x 34″ (864 mm)
VHzA
1-speed pump 120 60 7
Heated surface 120 60 0.5
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/Control/Heated
surface
120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
44 lbs/square foot (214 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
Locate a GFCI-protected 120 V, 15 A, grounded duplex
electrical outlet within 24″ (610 mm) of the bath junction box.
No change in measurements if connected with drain
illustrated. (K-7161-AF)
18-1/2"
(470 mm)
20"
(508 mm)
8-11/16"
(221 mm)
3"
(76 mm)
2-7/8"
(73 mm)
1" (25 mm)
3-1/2"
(89 mm)
18"
(457 mm)
60" (1524 mm)
36" (914 mm)
Pump/Control Access
(If Apron Is Not Used)
30" (762 mm) W x
15" (381 mm) H Min
1-1/4"
(32 mm)
1/2" (13 mm)
R. Max
1-1/2"
(38 mm)
Drop-in Rim
Detail
Integral Flange
Detail
Recommended Faucet Area
1-1/2" Bath Drain
Lumbar
Angle 33˚
1-1/2"
(38 mm)
20"
(508 mm)
1-1/4"
(32 mm)
21-1/4"
(540 mm)
Product Diagram
MARIPOSA
®
MARIPOSA
®
5’ BATH WHIRLPOOL WITH BASKTM
Page2of2
1201665-4-
A