Installation Guide

4. Install the Handles
CAUTION: Risk of product damage to the K-306-KS valve
assembly. When using this valve in a fiberglass or acrylic
installation, use the Thin Wall Installation Kit (88526).
Remove and discard the plaster guards from each valve stem.
Slip an escutcheon over each valve stem and against the finished
wall.
Install a spline adapter onto each valve stem.
Install a stem extension onto each spline adapter.
Slip a bonnet onto each stem extension until the escutcheon and
bonnet are snug against the finished wall.
Secure each bonnet to the valve stem with a screw (provided).
For a six-prong handle:
Press a handle onto each stem extension and secure in place with
a setcrew.
For a lever handle:
The lever handles are shipped fully assembled. Install a lever
handle onto each valve stem with a screw (provided).
Valve Stem
Escutcheon
Handle
Bonnet
Screw
Spline Adapter
Stem Extension
Handle
Screw
Setscrew
117061-2-A 6 Kohler Co.