Specification

Technical Information
Fixture*:
Basin area:
Bathing well 50″ (127 cm) x 24″ (61 cm)
Top area 65″ (165.1 cm) x 27″ (68.6 cm)
Weight 109 lbs (49.4 kg)
To overflow:
Water depth 14″ (35.6 cm)
Capacity 72 gal (272.5 L)
* Approximate measurements for comparison only.
Blower
motor:
Heater V Hz A
300 W 120 60 5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor: 120 V, 15 A, 60 Hz
Blower motor is supplied with a 24″ (61 cm)
grounding-type plug-in cord.
Installation Notes
Install this product according to the installation guide.
Floor support under the bath must provide for a minimum of
41 lbs/square foot (198 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no
interference with drain overflow and circulating system before
drilling any holes. Consult local and national codes for
minimum air gap requirements if installing a spout on the
faucet deck.
1-1/2" OD
36" (91.4 cm)
3" (7.6 cm)
72" (182.9 cm)
Integral Flange Detail
1-1/4"
(3.2 cm)
18"
(45.7 cm)
1-13/16"
(4.6 cm)
10-1/4"
(26 cm)
1-1/4"
(3.2 cm)
3-1/2"
(8.9 cm)
20"
(50.8 cm)
1/2"
(1.3 cm) R.
1"
(2.5 cm)
2-7/8"
(7.3 cm)
No change in measurements with drain
shown. (K-7166-AF or K-7166M-AF)
Recommended faucet area.
Product Diagram
MARIPOSA
®
MARIPOSA
®
6’ BUBBLEMASSAGETM BATH WITH INTEGRAL APRON
Page2of2
1040122-4-
C