Rough In Guide

Product Information
Fixture: Approx. measurements for comparison only.
Basin area, bottom 50″ (1270 mm) x 24″ (610 mm)
Basin area, top 65″ (1651 mm) x 27″ (686 mm)
Weight 88 lbs (39.9 kg)
Water depth 14″ (356 mm) to overflow
Capacity 72 gal (272.5 L) to overflow
Amplifier/
control:
15 W (per
channel)
120 V 50/60 Hz -
Heater: 65 W 120 V 60 Hz 1.1 A
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD): 120 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide. Ensure
that the interface, amplifier, and transducers are functional
before completing the installation.
Control amplifier fits 16″ (406 mm) center studs. 25’ (7.6 m)
cables are included.
Locate the bath within 24″ (610 mm) of a GFCI-protected 120
V, 15 A grounded electrical outlet. A second grounded outlet
within the wall framing must be within 24″ (610 mm) of the
planned control amplifier. One electrical service may be used
for the entire bath and related electrical components.
Drop-in cutout: 70″ (1778 mm) x 34″ (864 mm)
Floor support under bath must provide for a minimum of
39.7 lbs/square foot (193.8 kg/square meter) loading.
If installing a rim mount faucet, make sure any plumbing does
not interfere with the drain overflow before drilling any holes.
Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
The apron must be installed before the finished floor and wall
materials are installed.
Fixture conforms to CSA B45.5/IAPMO Z124. All dimensions
are nominal.
1-1/2"
(38 mm)
Drop-in Rim Detail
10-1/4"
(260 mm)
72" (1829 mm)
1" (25 mm)
36" (914 mm)
No change in measurements if connected with
drain illustrated. (K-7166-AF)
Recommended Faucet Area
1-1/4"
(32 mm)
1/2"
(13 mm) R.
Integral Flange Detail
20"
(508 mm)
3"
(76 mm)
2-7/8"
(73 mm)
3-1/2"
(89 mm)
1-1/4"
(32 mm)
18"
(457 mm)
1-1/2"
Bath Drain
*24"
(610 mm)
*10"
(254 mm)
*Recommended User
Interface Location
Control Amplifier
User Interface
3-3/16"
(81 mm)
11-3/4"
(298 mm)
14-1/2"
(368 mm)
7/8"
(22 mm)
3-1/2"
(89 mm)
5-5/8"
(143 mm)
Lumbar
Angle 42˚
1-1/2"
(38 mm)
18-1/2"
(470 mm)
21-1/4"
(540 mm)
Access Panel
30" (762 mm) W x
15" (381 mm) H Min
Roughing-In
K-1257-VBW, K-1257-VBLW, K-1257-VBRW
MARIPOSA
®
6’ VIBRACOUSTIC
®
BATH WITH BASK HEATED SURFACE
MARIPOSA
®
6’ VIBRACOUSTIC
®
BATH WITH BASK HEATED SURFACE
1214597-1-
A