Specification

Technical Information
Fixture*:
Bathing well:
Basin area, bottom 50″ (1270 mm) x 24″ (610 mm)
Basin area, top 65″ (1651 mm) x 27″ (686 mm)
Weight 77 lbs (35 kg)
To overflow:
Water depth 14″ (356 mm)
Capacity 72 gal (272.5 L)
* Approximate measurements for comparison only.
Heater: W V HZ A
65 120 60 .5
Installation Notes
Install this product according to the installation guide.
Floor support under the bath must provide for a minimum of
39.1 lbs/square foot (190.7 kg/square meter) loading.
If used, the optional apron must be installed before the
finished floor and wall materials are installed.
Locate a GFCI-protected 120 V, 15 A, grounded electrical
outlet within 24″ (610 mm) of the bath junction box.
40″ (1016 mm) cable is included.
35-7/8"
(911 mm)
66" (1676 mm)
1" (25 mm)
3" (76 mm)
1-1/2" Bath Drain
2-7/8"
(73 mm)
No change in measurements with drain
shown. (K-7166-AF)
Recommended faucet area
18"
(457 mm)
10-1/4"
(260 mm)
20"
(508 mm)
1-1/2"
(38 mm)
3-1/2"
(89 mm)
18-1/2"
(470 mm)
21-1/4"
(540 mm)
Integral
1-1/4"
(32 mm)
1/2" (13 mm) R.
Lumbar
Angle 42˚
Access Panel
20" (508 mm) W x
15" (381 mm) H Min
Product Diagram
MARIPOSA
®
MARIPOSA
®
6’ BATH WITH BASKTM HEATED SURFACE
Page2of2
1201649-4-
B