Rough-In Guide

Product Information

Applicable product:

Single-center hole sink K-12781

8″ (20.3 cm) centers sink K-12787

Recommended accessories:

Wall brackets K-1814-P

Fixture*:

Sink

Basin area 28″ (71.1 cm) x 18″ (45.7 cm)

Water depth 8-5/8″ (21.9 cm)

Outlet 2-1/4″ (5.7 cm) D.

Faucet hole 1-3/8″ (3.5 cm) D.

* Approximate measurements for comparison only.

Installation Notes

Install this product according to the installation guide.

Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All

dimensions are nominal.

K-12787

K-12781

2-3/4" (7 cm)

7-1/2" (19 cm)

22" (55.9 cm)

30" (76.2 cm)

8" (20.3 cm)

9-1/2" (24.1 cm)

11" (27.9 cm)

25-1/4" (64.1 cm)

14"

(35.6 cm)

36"

(91.4 cm)

40-1/2" (102.9 cm)

1-1/2" Outlet

8" (20.3 cm)

Roughing-In

K-12781, K-12787

GILFORD

SCRUB-UP/PLASTER SINK

GILFORDTM SCRUB-UP/PLASTER SINK

113841-1-

PAGE 1
K-12781, K-12787 GILFORDTM SCRUB-UP/PLASTER SINK Roughing-In Installation Notes Product Information Install this product according to the installation guide. Applicable product: Single-center hole sink 8″ (20.3 cm) centers sink K-12781 K-12787 Recommended accessories: Wall brackets K-1814-P Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All dimensions are nominal. Fixture*: Sink Basin area 28″ (71.1 cm) x 18″ (45.7 cm) Water depth 8-5/8″ (21.9 cm) Outlet 2-1/4″ (5.7 cm) D.