Installation Guide

2. Prepare the Apron
This apron ships assembled. Remove the apron panel from the apron frame and set the panel aside
before beginning the installation.
3. Install the Apron
Insert the bottom of the apron frame under the rim of the bath/whirlpool.
Center and push the apron frame up until it contacts the underside of the bath rim.
Thread one wingnut and one flat washer onto the carriage bolt.
Insert the carriage bolt assembly into the upper center hole in the back of the apron frame.
Loosely assemble the second flat washer and wingnut to the carriage bolt from the front of the
apron frame. Do not tighten at this time.
Apron
Panel
Apron
Frame
Push
Frame
Up
Bath Rim
Subfloor
Apron
Frame
Bath
Carriage
Bolt
Apron
Frame
Flat
Washer
Wing
Nut
Kohler Co. 3 1011308-2-C