Specification

Technical Information
Fixture:* basin area top area weight
Bathing
well
42″ (1067 mm)
x28″ (711 mm)
55″ (1397 mm)
x
40″ (1016 mm)
87 lbs.
(39.5 kg)
water depth capacity
To
overflow
15-1/2″
(394 mm)
73 gal. (276.3 L)
* Approximate measurements for comparison only.
Blower
motor:
Heater Voltage Frequency Amperage
300 W 120 V 60 Hz 5 A
Included component:
Cutout template 1017044-7
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor: 120 V, 15 A, 60 Hz
Blower motor is supplied with a 24″ (610 mm)
grounding-type plug-in cord.
Installation Notes
Install this product according to the installation guide.
Floor support under the bath must provide for a minimum of
41 lbs/square foot (200 kg/square meter).
A blower motor access panel is required.
Blower Access
Rim of Bath
Drop-In Rim Style
Cut-Out Detail
42-1/4" (1073 mm)
60" (1524 mm)
58-1/2" (1486 mm)
40-3/4"
(1035 mm)
21"
(533 mm)
1-1/4"
(32 mm)
1" (25 mm)
1-1/2" OD
3"
(76 mm)
2-7/8"
(73 mm)
3-5/8"
(92 mm)
21-1/8"
(537 mm)
11"
(279 mm)
3-1/4"
(83 mm)
20" (508 mm) W x
15" (381 mm) H
No change in measurements with drain
shown. (K-7166-AF or K-7166M-AF)
Product Diagram
SERIFTM 5’ BUBBLEMASSAGETM
SERIFTM 5’ BUBBLEMASSAGETM OVAL DROP-IN BATH WITH AIRJETS
Page2of2
1040126-4-
C