Specification

Technical Information
Fixture*:
Basin area:
Bathing well 42″ (106.7 cm) x 28″ (71.1 cm)
Top area 55″ (139.7 cm) x 40″ (101.6 cm)
To overflow:
Water depth 15-1/2″ (39.4 cm)
Capacity 73 gal (276.3 L)
Weight 115 lbs (52 kg)
* Approximate measurements for comparison only.
Pump: Hp V Hz A
1-speed 1.25 120 60 7.5
Heater: kW V Hz A
1.5 120 60 12.5
Included components:
Cutout template 1017044-7
Required Electrical Service
Two dedicated circuits required, each protected with
Class A Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater 120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within
24″ (61 cm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
43 lbs/square foot (208 kg/square meter) loading.
Provide pump/control access in either location shown;
supplies must not interfere with pump/control access.
No change in measurements if connected with drain
illustrated.
Pump/Control Access
20" (50.8 cm) W x
15" (38.1 cm) H
42-1/4" (107.3 cm)
21"
(53.3 cm)
1-1/4"
(3.2 cm)
1-1/2" OD
1" (2.5 cm)
60" (152.4 cm)
3-1/4" (8.3 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
21-1/8"
(53.7 cm)
3-5/8"
(9.2 cm)
11" (27.9 cm)
Product Diagram
SERIF
®
SERIF
®
5’ BATH WHIRLPOOL WITH HEATER
Page2of2
1017026-4-
B