Specification

Technical Information
Fixture*:
Basin area:
Bathing well 42″ (1067 mm) x 28″ (711 mm)
Top area 55″ (1397 mm) x 40″ (1016 mm)
To overflow:
Water depth 15-1/2″ (394 mm)
Capacity 73 gal (276.3 L)
Weight 115 lbs (52 kg)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7.5
Heater: kW V Hz A
1.5 120 60 12.5
Included components:
Cutout template 1017044-7
Required Electrical Service
Two dedicated circuits required, each protected with
Class A Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater 120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within 24″
(610 mm) of the pump and heater.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
43 lbs/square foot (208 kg/square meter) loading.
Provide pump/control access in either location shown;
supplies must not interfere with pump/control access.
No change in measurements if connected
with drain illustrated.
Pump/Control Access
20" (508 mm) W x
15" (381 mm) H
42-1/4" (1073 mm)
21"
(533 mm)
1-1/4"
(32 mm)
1-1/2" OD
1" (25 mm)
60" (1524 mm)
3-1/4" (83 mm)
2-7/8"
(73 mm)
3" (76 mm)
21-1/8"
(537 mm)
3-5/8"
(92 mm)
11" (279 mm)
Product Diagram
SERIF
®
SERIF
®
5’ BATH WHIRLPOOL WITH HEATER
Page2of2
1017028-4-
D