Specification

Features

•

Brass construction

•

Fixture-mount design

•

Intended for urinal installations with 3/4 '' spud coupling

connection

•

Non-hold open piston technology for accurate activation

•

Retrofit models require a control stop and vacuum breaker

•

1.0 gpf (3.8 lpf) flow rate

CSA B651

OBC

Codes/Standards

ASME A112.18.1/CSA B125.1

CSA B125.3

CSA B64

ASSE 1037

ADA

ICC/ANSI A117.1

CSA B651

OBC

KOHLER

Electronic Faucets, Valves,

and Controls - Five-Year Limited

Warranty

See website for detailed warranty information.

Available Color/Finishes

Color tiles intended for reference only.

DescriptionCodeColor

Polished ChromeCP

USA/Canada: 1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

8-11-2015 02:20

1.0 gpf Exposed Flushometer

K-13518

PAGE 1
.0 gpf Exposed Flushometer K-13518 Features • • • • • • Brass construction Fixture-mount design Intended for urinal installations with 3/4 '' spud coupling connection Non-hold open piston technology for accurate activation Retrofit models require a control stop and vacuum breaker 1.0 gpf (3.8 lpf) flow rate CSA B651 OBC Codes/Standards ASME A112.18.1/CSA B125.1 CSA B125.3 CSA B64 ASSE 1037 ADA ICC/ANSI A117.
PAGE 2
1.0 gpf Exposed Flushometer K-13518 6" (152 mm) critical level above the fixture Technical Information All product dimensions are nominal. Faucet: Flow rate: Pressure: 1 gal/min (3.8 l/min) 80 psi (5.5 bar) Notes Install this product according to the installation guide. IMPORTANT! Maintain a 6” (152 mm) minimum critical level above the fixture to prevent back-siphonage. Operating pressure over 80 psi (552 kPa) is not recommended on most plumbing fixtures.