Specification

Technical Information
Fixture*:
Basin area:
Bathing well 42″ (1067 mm) x 20″ (508 mm)
Top area 51″ (1295 mm) x 24″ (610 mm)
Weight 90 lbs (40.8 kg)
To overflow:
Water depth 14″ (356 mm)
Capacity 60 gal (227.1 L)
* Approximate measurements for comparison only.
Drop-in cutout 58″ (1473 mm) x 30″ (762 mm)
VHzA
Blower motor 120 60 10
Heated surface 120 60 .5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI).
Blower motor/Heated surface 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
NOTICE: Relocation of the blower motor and check valve is
optional. Mount the blower motor and check valve together;
do not move one without the other. Two access panels are
required for blower motor and check valve relocation. Provide
one access panel at the blower motor/control location and
another at the heated surface location.
Floor support under the bath must provide for a minimum of
47 lbs/square foot (230 kg/square meter) loading.
Locate a GFCI-protected 120 V, 15 A, grounded duplex
electrical outlet within 24″ (610 mm) of the blower motor.
1" (25 mm)
3"
(76 mm)
16"
(406 mm)
No change in measurements with drain
shown. (K-7161-AF)
Blower Motor Access
30" (762 mm) W x
15" (381 mm) H Min
2-1/2"
(64 mm)
18-1/2"
(470 mm)
20"
(508 mm)
9"
(229 mm)
60" (1524 mm)
32" (813 mm)
1-1/2"
(38 mm)
1-1/2"
Bath Drain
Drop-in Rim Detail
1-1/2"
(38 mm)
Lumbar
Angle 23˚
Product Diagram
DEVONSHIRE
®
DEVONSHIRE
®
5’ BUBBLEMASSAGETM BATH WITH BASKTM
Page2of2
1201687-4-
B