Rough In Guide

Product Information
Fixture: Approx. measurements for comparison only.
Bathing well:
Basin area, bottom 42 (1067 mm) x 20 (508 mm)
Basin area, top 51 (1295 mm) x 24 (610 mm)
Weight 91 lbs (41.3 kg)
To overflow:
Water depth 14 (356 mm)
Capacity 60 gal (227.1 L)
Amplifier/
control:
15 W (per
channel)
120 V 50/60 Hz -
Heater: 65 W 120 V 60 Hz 1.1 A
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD): 120 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide. Ensure
that the interface, amplifier, and transducers are functional
before completing the installation.
Control amplifier fits 16 (406 mm) center studs. 25’ (7.6 m)
cables are included.
Locate the bath within 24 (610 mm) of a GFCI-protected 120
V, 15 A grounded electrical outlet. A second grounded outlet
within the wall framing must be within 24 (610 mm) of the
planned control amplifier. One electrical service may be used
for the entire bath and related electrical components.
Floor support under bath must provide for a minimum of
41 lbs/square foot (200.2 kg/square meter) loading.
Fixture conforms to CSA B45/IAPMO Z124. All dimensions
are nominal.
21-1/4"
(540 mm)
20"
(508 mm)
1/2" (13 mm)
R. Max
1-1/4"
(32 mm)
Integral Flange Detail
32" (813 mm)
No change in measurements if connected with drain
illustrated. (K-7161-AF)
*Recommended User
Interface Location
Control Amplifier
User Interface
3-3/16"
(81 mm)
11-3/4"
(298 mm)
14-1/2"
(368 mm)
7/8"
(22 mm)
3-1/2"
(89 mm)
5-5/8"
(143 mm)
Lumbar
Angle 25˚
60" (1524 mm)
1" (25 mm)
2-1/2"
(64 mm)
1-1/2"
Bath Drain
3"
(76 mm)
1-1/4"
(32 mm)
9"
(229 mm)
16"
(406 mm)
*10"
(254 mm)
*24"
(610 mm)
Roughing-In
K-1357-VBLAW, K-1357-VBRAW
DEVONSHIRE
®
5’ VIBRACOUSTIC
®
BATH WITH BASK HEATED SURFACE
DEVONSHIRE
®
5’ VIBRACOUSTIC
®
BATH WITH BASK HEATED SURFACE
1214598-1-
A

Summary of content (1 pages)