Installation Guide

2. Install the Handles and Check Valves
NOTE: Handles that are marked ″Cold″ with a blue tape must
always be installed onto the right valve as viewed from the front of
the bedpan washer.
One Handle Installation
To install one handle, remove the thread protector from the valve.
Turn the valve to the closed position.
Apply a bead of plumbers putty or other sealant to backside of
the escutcheon according to the putty manufacturer’s instructions.
Thread the escutcheon onto the valve body until it is snug against
the finished wall.
Remove any excess putty or sealant.
Press the spline adapter into the valve stem.
Press the handle onto the escutcheon and spline adapter. Secure
with a screw.
Insert one button cap into the top and over the screw.
Supply
Valve
Spline
Adapter
Escutcheon
Escutcheon
Valve
Stem
Handle
Round-Head
Screw
Button
Cap
Apply
Plumbers
Putty.
Apply
Plumbers
Putty.
Check Valve
Shield
Kohler Co. 5 1034409-2-A