Specification

Technical Information
Fixture*:
Basin area:
Bathing well 48″ (1219 mm) x 27″ (686 mm)
Top area 60″ (1524 mm) x 30″ (762 mm)
Weight 156 lbs (70.8 kg)
To overflow:
Water depth 16″ (406 mm)
Capacity 94 gal (355.8 L)
* Approximate measurements for comparison only.
VHzA
Blower motor/Heated surface 220-240 50/60 5
Drop-in
cutout
70-1/2″ (1791 mm) x 40-1/2″ (1029 mm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Blower motor/Heated
surface
220-240 V, 15 A, 50/60 Hz
Installation Notes
NOTICE: Relocation of the blower motor and check valve is
optional. Mount the blower motor and check valve together;
do not move one without the other. Two access panels are
required for blower motor and check valve relocation. Provide
one access panel at the blower motor/control location and
another at the heated surface location.
Install this product according to the installation guide.
Floor support under the bath must provide for a minimum of
54 lbs/square foot (261 kg/square meter) loading.
Locate a GFCI-protected 120 V, 15A, grounded duplex
electrical outlet within 24″ (610 mm) of the blower motor.
1-1/2" Bath Drain
No change in measurements with drain
shown. (K-7161-AF)
11-3/4"
(298 mm)
42" (1067 mm)
Blower Motor/Control Access
34" (864 mm) W x
15" (381 mm) H
36" (914 mm)
72" (1829 mm)
2-7/8"
(73 mm)
3" (76 mm)
1-1/16"
(27 mm)
20-1/8"
(511 mm)
3" (76 mm)
22"
(559 mm)
1-7/8"
(48 mm)
Product Diagram
MEMOIRS
®
MEMOIRS
®
6’ BUBBLEMASSAGETM BATH WITH BASKTM
Page2of2
1201710-4-
B