Dimensions Guide

Lumbar
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Install this product according to the installation
instructions.
120 V, 15 AAmplifier, Heated
Surface:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Technical Information
All product dimensions are nominal.
Control amplifier fits 16" (406 mm) center studs.
25' (7.6 m) cables are included.
Drop-inInstallation:
CenterDrain location:
If installing a rim-mount faucet, make sure there
is no interference above or below the deck before
drilling any holes.
48" x 27" (1219 mm x 686 mm)Basin area, bottom:
60" x 30" (1524 mm x 762 mm)Basin area, top:
97 lbs (44 kg)Weight:
44 lbs/ft² (214.8 kg/m²)Minimum floor load:
16" (406 mm)Water depth:
94 gal (355.8 L)Water capacity:
Drop-in, 70-1/2" x 40-1/2" (1791 mm x
1029 mm)
Cutout:
Amplifier: 120 V, 1.1 A, 50/60 Hz
Heated Surface: 120 V, 0.5 A, 50/60 Hz,
65 W
Electrical component
rating:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-5-2018 09:02
Memoirs
®
6' VibrAcoustic
®
Bath
K-1418-VBW