Installation Guide

1014299-2-B

Kohler Co.

Nut

Apply

Plumbers

Putty

Metal

Washer

Escutcheon

Apply Plumbers

Putty

Handle

Body

Cross-

Handle

1. Spout Installation

- Apply a bead of plumbers putty or other sealant to the underside of the

spout according to the putty manufacturer’s instructions.

- Fit the spout through the top of the lavatory.

- Install the metal washer and nut. Position the washer so the second hole

lines up with the drain lift rod hole. Securely wrench tighten the nut.

- Remove any excess putty or sealant.

2. Handle Body Installation

- Apply a bead of plumbers putty or other sealant to the underside of the

escutcheons according to the putty manufactur er’s instructions.

- Insert the handle bodies into the mounting holes from the top of the

lavatory. Make sure the body marked “COLD” is installed in the

right-hand hole (as viewed from the front of the lavatory).