Installation Guide

1014299-2-B
7
Kohler Co.
Supply Tube
Supply Tube
Spout
Aerator
4. Supply Tube and Supply Stop Connections
- Install the lavatory using the lavatory manufacturer’s instructions.
- Connect the supply tubes to the handle bodies and supply stops. (Left is
hot - right is cold).
- T ighten all connections.
5. Installation Checkout
- Connect the tailpiece and P-trap.
- Ensure that all connections are tight.
- Remove aerator by turning it counterclockwise.
- Open the drain.
- Turn on main water supply and check for leaks. Repair as needed.
- Open both hot and cold valves and run water through the spout for
about a minute to remove debris. Check for leaks. Turn valves off.
- Remove any debris from aerator and reinstall.