Installation Guide

3
113345-2-BA (B)
Kohler Co., Kohler, WI
Slip round base or escutcheon over copper tubing and
into place on faucet base. Insert faucet tubing into hole in
lavatory.
Fig. #4
Lavatory
Tubing
Round Base
From underside of lavatory, place bracket, spacer, and
nut onto mounting stud. Position faucet so that lift rod is
toward the back and lever handle is aligned with center of
spout. Tighten nut securing faucet to lavatory. Remove
excess putty from around base of faucet.
Fig. #5
Bracket
Spacer
Nut
Mounting Stud