Installation Guide

5. Undercounter/Solid Surface Preparation
CAUTION: Risk of personal injury or product damage.
Large sinks are very heavy. Get help lifting the sink into
place.
NOTE: Instructions in this section are for both undercounter and
solid surface installation. Any differences are noted in the text.
NOTE: Use shims to level the sink if needed.
Verify that the sink will fit in the cabinet opening. If necessary,
adjust the opening by sanding the opening or adding wood filler
strips.
For solid surface installation, install the faucet to the sink
according to the manufacturer’s instructions.
Install the strainer or garbage disposal to the sink according to
the manufacturer’s instructions.
Apply a 1″ (2.5 cm) spot of sealant at each corner of the frame
where it will contact the sink.
NOTE: If using shims additional sealant will be needed.
Carefully position the sink within the frame, making sure to
center the sink in the cabinet.
Optional: Apply sealant between the cabinet and the apron.
"Y"
Wood Filler Strip (Optional)
Sink Rim Flush With
Top of Cabinet
Kohler Co. 9 1019949-2-C