Installation Guide

Installation/Installation/Instalación
12
11
10
Washer
Rondelle
Arandela
Ring/Anneau/Anillo
Surface Material
Matériau de la surface
Material de la superficie
1/4"
(6 mm)
Ring
Anneau
Anillo
Hose
Tuyau
Manguera
Spout Connection
Connexion du bec
Conexión del surtidor
Connect the outlet hose to the
spout connection.
Connecter le tuyau de sortie à
la connexion du bec.
Conecte la manguera de salida
en la conexión del surtidor.
Turn the ring until the screws are to the
front and back. Tighten the screws
securely and evenly.
Tourner l'anneau pour que les vis soient
l'avant et l'arrire. Bien serrer les vis
de manire gale.
Gire el anillo hasta que los tornillos
estén orientados hacia el frente y hacia
atrás. Apriete los tornillos con seguridad
y uniformemente.
Slide the washer onto the remote
valve shank. Thread the ring
leaving approximately 1/4" (6 mm)
between the ring and the surface
material.
Glisser la rondelle sur le manche
de valve distance. Visser l'anneau
en laissant approximativement 1/4"
(6 mm) entre l'anneau et le
matériau de la surface.
Deslice la arandela en el vástago
de la válvula remota. Enrosque el
anillo dejando aproximadamente
1/4" (6 mm) entre el anillo y el
material de la superficie.
1123724-2-C 8 Kohler Co.