Installation Guide

1. Faucet Installation
CAUTION: Risk of restricted water flow and product damage.
Use extreme care when bending the supply hoses to avoid
kinking.
Slide the gasket up over the faucet supply hose inlets and hose
outlet.
Place the gasket with the faucet supply hose inlets and hose
outlet to the bottom of the escutcheon.
NOTE: Plumbers putty or other sealant may be used instead of the
gasket provided. Apply the plumbers putty or other sealant
according the manufacturer’s instructions.
Feed the faucet supply hoses and hose outlet through the sink
hole.
Position the faucet on the sink to obtain the desired alignment.
Fit the bracket and washer on the threaded stud.
Secure the bracket and washer with the nut.
Carefully bend the supply hoses straight.
Supply
Hoses
Apply
plumbers
putty.
Hose
Outlet
Threaded
Stud
Sink
Bracket
Washer
Nut
Gasket
Escutcheon
Faucet
Kohler Co. 3 1011155-2-C