Installation Guide

1. Faucet Installation
Clean the lavatory surface to remove any grease, oil or debris.
Apply a ring of plumbers putty or other sealant around the
underside edge of the faucet body according to the putty
manufacturer’s instructions.
Insert the faucet through the lavatory holes.
Depending on the lavatory thickness, install either a dished or
crimped washer to each spout shank.
Check the faucet alignment.
Thread the nuts onto the faucet shank and securely hand-tighten.
Wipe away any excess sealant.
Shank Body
Dished
Washer
Crimped
Washer
Plumbers
Putty
Faucet Inlet
Nut
Kohler Co. 3 1031181-2-A