Installation Guide

4 Kohler Co., Kohler, WI
113319-2-EA(-)
3. For multiple-post accessories, confirm that the center
points are level.
NOTE: There is no provision for later adjustment if the
center points and resulting pilot holes for multiple-post
accessories are not level.
Fig. #5
Multiple-Post Accessory
Center-to-Center Points
Wall Plate Hole Locations
C. DRILL PILOT HOLES
1. Carefully drill 5/16” mounting holes at all the pilot hole
locations previously marked.
2. Use a bit and drilling technique appropriate for the wall
material through which you are drilling.
Fig. #6