Installation Guide

11Kohler Co., Kohler, WI
113319-2-EA(-)
7. Start setscrews into brackets of bracket assembly.
Check that screws do not protrude into the recesses for
the shelf.
8. Wet ends of shelf with a mild soap solution.
9. Carefully slide shelf into position in brackets; adjust
bracket assembly alignment as necessary.
10. Tighten setscrews to secure bracket assemblies to wall
plates.
Fig. #20
Bracket
Assembly
Setscrew
Shelf
Setscrew
Bracket
Assembly
C. K-16145 MIRROR
1. Place mirror face down on a flat, padded surface.
2. Place a post over over each mirror stud and secure
loosely with a knob.
3. Start a screw into the back of each post.
4. Align posts to the same plane for proper mirror angle.
5. Tighten screws and knobs.
Fig. #21
Screw
Post
Knob
Stud
Post
Stud
Knob
Screw