Installation Guide

5Kohler Co., Kohler, WI
113319-2-EA(-)
WALL PLATE INSTALLATION
A. INSERT WALL ANCHORS
1. Press and hold the legs of a wall anchor (provided)
together, and insert the wall anchor legs into the hole.
Insert all wall anchors into the pre-drilled mounting holes.
2. With a hammer, carefully tap each wall anchor until all
are flush with the finished surface.
Fig. #7
B. SPREAD ANCHORS AS NECESSARY
1. If the wall anchor was inserted into a space between the
studs, it will be necessary to spread the wall anchor legs.
2. Insert a narrow rod, such as a finishing nail, into the wall
anchor hole to spread the legs behind the wall surface.
3. Repeat for all wall anchors inserted between studs.
Fig. #8
Nail
4. Ensure that the wall anchors are flush with the finished
surface.
Fig. #9
Finished Surface