Installation Guide

10 Kohler Co., Kohler, WI
113319-2-EA(-)
MULTIPLE-POST ACCESSORY INSTALLATION
A. K-16147, K-16148 TOWEL BARS
1. Place towel bar through one post and secure with a
knob.
2. Place a ferrule, small end first, over open end of towel
bar.
3. Place sleeve over open end of towel bar.
4. Place a ferrule, large end first, over open end of towel
bar.
5. Align second post over towel bar assembly and secure
loosely with knob.
Fig. #17
Post
Knob
Ferrule
Towel Bar
Sleeve
Post
Knob
Ferrule
6. Start a setscrew into each post hole as illustrated.
7. Align towel bar assembly posts post over wall plates.
8. Tighten setscrews.
9. Tighten knobs on towel bar assembly.
Fig. #18
Wall Plate
Setscrew
Towel Bar
Assembly
Setscrew
Wall Plate
B. K-16143 GLASS SHELF
1. Start setscrew into hole in post as illustrated.
2. Thread a stud into a bracket.
3. Place stud through post, and secure with knob.
4. Align post over wall plate.
5. Loosely secure setscrew.
6. Repeat for second post assembly.
Fig. #19
Wall Plate
Post
Setscrew
Knob
Stud
Bracket