Installation Guide

Tools and Materials
Before You Begin
NOTICE: Adequate floor support must be provided. Note the model number located on the heater side
of the bath, then visit the product page at www.kohler.com for additional information.
NOTICE: Do not support the load weight of the bath by the rim. Shim under the bath as needed when
leveling the bath.
NOTICE: Before installing a rim-mount bath faucet, refer to the specification sheet on the bath product
page at www.kohler.com.
Unpack and inspect the bath for damage. Return the bath to the carton until installation.
When planning the installation area, provide access to all final plumbing connections for servicing.
For undermount installations, an undermount kit is required.
100% Silicone Sealant
Plus:
• Conventional Woodworking
Tools and Materials
• Drop Cloth
• Construction Adhesive (Optional)
• Cement* or Mortar (Optional)
• 2x4s
• Plastic Film (Optional)
• 1/8" (3 mm) Spacers
* Do not use gypsum cement.
Kohler Co. 3 1196030-2-C