Dimensions Guide

22"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower, Amplifier,
Heated Surface:
Technical Information
Control amplifier fits 16" (406 mm) center studs.
25' (7.6 m) cables are included.
All product dimensions are nominal.
Drop-in, Under-mountInstallation:
Remote blower installation kit K-1446 is available
for relocating the blower. Provide access for
servicing the blower.
CenterDrain location:
45-3/4" x 25-15/16" (1162 mm x 659 mm)Basin area, bottom:
65-3/8" x 29-5/16" (1661 mm x 745 mm)Basin area, top:
Kit is required for under-mount installations (sold
separately).
117 lbs (53.1 kg)Weight:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
58.6 lbs/ft² (286.1 kg/m²)Minimum floor load:
19-7/16" (494 mm)Water depth:
112.9 gal (427.4 L)Water capacity:
Drop-in, 71-1/2" x 35-1/2" (1816 mm x
902 mm)
Cutout:
Blower: 120 V, 10 A, 60 Hz
Amplifier: 120 V, 1.2 A, 50/60 Hz
Electrical component
rating:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-28-2018 10:00
Underscore
®
Rectangle
6' VibrAcoustic
®
BubbleMassage
™
Bath
K-1835-GVBCW