Specification

(cont.) Optional Accessories
K-1705 Remote control ❑ NA
K-9498 3″ (76 mm) whirlpool keypad trim ❑ CP ❑ PB ❑ Other_____
1013469 Trim ring, interface, core ❑ CP ❑ PB ❑ Other_____
Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
45-3/4″ (1162 mm) x 25-15/16″ (659 mm)
Basin area,
top
65-3/8″ (1661 mm) x 29-5/16″ (745 mm)
Weight 113 lbs (51.3 kg)
To overflow:
Water depth 19-7/16″ (494 mm)
Capacity 112.9 gal (427 L)
* Approximate measurements for comparison only.
VHzA
Blower motor/Heated surface 220-240 50/60 5
Drop-in cutout 71-1/2″ (1816 mm) x 35-1/2″ (902 mm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Blower motor/Heated
surface
220-240 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 60
lbs/square foot (291 kg/square meter) loading.
72" (1829 mm)
36"
(914 mm)
18"
(457 mm)
1"
(25 mm)
1/2"
(13 mm)
4-1/8"
(105 mm)
No change in measurement if connected with
drain illustrated. (K-7272)
1-1/2" Bath Drain
23"
(584 mm)
NOTE: Blower protrusion beyond the rim.
1"
(25 mm)
36"
(914 mm)
Blower Motor/Control Access
30" (762 mm) W x
15" (381 mm) H Min
2-7/16"
(62 mm)
Lumbar
Angle 33˚
22"
(559 mm)
Product Diagram
UNDERSCORE
®
UNDERSCORE
®
6’ BUBBLEMASSAGETM BATH WITH BASKTM
Page2of2
1201700-4-
B