Specification

(cont.) Optional Accessories
K-1705 Remote control ❑ NA
K-9498 3″ (76 mm) whirlpool keypad trim ❑ CP ❑ PB ❑ Other_____
K-1013469 Trim ring, interface, core ❑ CP ❑ PB ❑ Other_____
Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
39-9/16″ (1005 mm) x 24-11/16″
(627 mm)
Basin area, top 53-5/8″ (1362 mm) x 29-1/2″ (749 mm)
Weight 106 lbs (48.1 kg)
To overflow:
Water depth 17-1/8″ (435 mm)
Capacity 81.1 gal (307 L)
* Approximate measurements for comparison only.
VHzA
Blower motor/Heated surface 220-240 50/60 5
Drop-in cutout 59-1/2″ (1511 mm) x 35-1/2″ (902 mm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Blower motor/Heated
surface
220-240 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 54
lbs/square foot (263 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
1"
(25 mm)
60" (1524 mm)
21"
(533 mm)
36"
(914 mm)
2-7/16"
(62 mm)
18"
(457 mm)
12-5/8"
(321 mm)
13/16"
(21 mm)
4-1/8"
(105 mm)
No change in measurement if connected with
drain illustrated. (K-7272)
1-1/2" Bath Drain
Blower Motor/Control Access
30" (762 mm) W x
15" (381 mm) H Min
Lumbar
Angle 33˚
20"
(508 mm)
Product Diagram
UNDERSCORE
®
UNDERSCORE
®
5’ BUBBLEMASSAGETM BATH WITH BASKTM
Page2of2
1201703-4-
B