Specification Sheet

20"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Install this product according to the installation
instructions.
120 V, 15 A, 50/60 HzAmplifier:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Technical Information
All product dimensions are nominal.
Drop-in, Under-mountInstallation:
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
EndDrain location:
39-9/16" x 24-11/16" (1005 mm x 627 mm)Basin area, bottom:
Control amplifier fits 16" (406 mm) center studs.
25' (7.6 m) cables are included.
53-5/8" x 29-1/2" (1362 mm x 749 mm)Basin area, top:
80 lbs (36.3 kg)Weight:
52 lbs/ft² (253.9 kg/m²)Minimum floor load:
17-1/8" (435 mm)Water depth:
81.1 gal (307 L)Water capacity:
Drop-in, 59-1/2" x 35-1/2" (1511 mm x
902 mm)
Cutout:
Amplifier: 120 V, 50/60 Hz, 15 WElectrical component
rating:
2-11/16" (68 mm)Minimum flat for door:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-30-2016 04:28
Underscore
®
5' VibrAcoustic
®
Bath
K-1849-VB