Specification

Large shower basket
K-1897
8-1/8"
(206 mm)
2-3/4" (70 mm)
2-9/16" (65 mm)
3"
(76 mm)
Technical Information
All product dimensions are nominal.
Material: Stainless Steel
Notes
Install this product according to the installation
guide.
Shower backet must be mounted to a brace
between the wall studs.
The screws (provided) must be attached to
ceramic tile, cement board, or a brace between
the wall studs.
If mounting on ceramic tile, do not position the
screw locations of the shower basket on a grout
line.
Apply silicone sealant into the drilled holes
before securing the shower basket to the
finished surface. This will reduce the risk of
water damage behind the finished surface.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
4-3-2023 21:24 - US/CA