Dimensions Guide

1-1/4"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower, Heated
Surface:
Technical Information
Remote blower installation kit K-1446 is available
for relocating the blower. Provide access for
servicing the blower.
All product dimensions are nominal.
Three-wall alcoveInstallation:
LeftDrain location:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
45-1/8" x 19-11/16" (1146 mm x 500 mm)Basin area, bottom:
52-1/8" x 22-1/16" (1324 mm x 560 mm)Basin area, top:
ADA compliant when installed to the specific
requirements of these regulations.
102 lbs (46.3 kg)Weight:
48.2 lbs/ft² (235.3 kg/m²)Minimum floor load:
15-1/8" (384 mm)Water depth:
57 gal (215.8 L)Water capacity:
Blower: 120 V, 10 A, 60 Hz
Heated Surface: 120 V, 0.5 A, 60 Hz, 65
W
Electrical component
rating:
VariableBlower speed:
2" (51 mm)Minimum flat for door:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
11-13-2018 08:35 - US/CA
Archer
®
5' BubbleMassage
™
Bath
K-1947-GLAW