Specification

Technical Information
Fixture*:
Bathing well:
Basin area, bottom 45-1/8″ (1146 mm) x
19-11/16″ (500 mm)
Basin area, top 52-1/8″ (1324 mm) x
22-1/16″ (560 mm)
Weight 98 lbs (44.5 kg)
To overflow:
Water depth 15-1/8″ (384 mm)
Capacity 57 gal (216.9 L)
* Approximate measurements for comparison only.
Drop-in cutout 58-1/2″ (1486 mm) x 28-1/2″ (724 mm)
Blower
motor:
Heater V Hz A
300 W 120 60 10
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor: 120 V, 15 A, 60 Hz
Locate the outlet behind the bath and within 24″
(610 mm) of the blower motor.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 48 lbs/square foot (234 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
1-1/2"
Bath Drain
60" (1524 mm) 30" (762 mm)
No change in measurements if connected
with drain illustrated. (K-7271 or K-7272)
3/4" (19 mm)
2-1/2"
(64 mm)
11-1/4"
(286 mm)
15"
(381 mm)
4-1/8"
(105 mm)
1-1/2"
(38 mm)
Drop-in Rim
Detail
1-1/4"
(32 mm)
Blower Motor Access
20" (508 mm) W x 15" (381 mm) H
Lumbar Angle 24˚
1/2" (13 mm) R.
1-1/4"
(32 mm)
Integral Flange
Detail
19"
(483 mm)
K-1947-G
20-1/4"
(514 mm)
K-1947-GLF
K-1947-GRF
Product Diagram
ARCHER
®
ARCHER
®
5’ BUBBLEMASSAGETM BATH
Page2of2
1208014-4-
A