Specification

Technical Information
Fixture*:
Bathing well
Basin area, bottom 45-1/8″ (1146 mm) x
19-11/16″ (500 mm)
Basin area, top 52-1/8″ (1324 mm) x
22-1/16″ (560 mm)
Weight 76 lbs (34.5 kg)
To overflow
Water depth 15-1/8″ (384 mm)
Capacity 57 gal (216.9 L)
* Approximate measurements for comparison only.
Amplifier/control 15 W (per
channel)
120 V 50/60 Hz
Required Electrical Service
Circuit protected with a Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device
(RCD) required: 120 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide. Ensure
that the interface, amplifier, and transducers are functional
before completing the installation.
Control amplifier fits 16″ (406 mm) center studs. 25’ (7.6 m)
cables are included.
Locate the bath within 24″ (610 mm) of a GFCI-protected 120
V, 15 A grounded electrical outlet.
Floor support under this product must provide for a minimum
of 46.1 lbs/square foot (225 kg/square meter) loading.
Will comply with ADA when installed per Section 607
Bathtubs of the 2010 ADA Standards for Accessible Design.
1/2" (13 mm) R.
Lumbar
Angle 24˚
No change in measurements if connected
with drain illustrated. (K-7272)
4-1/8"
(105 mm)
15"
(381 mm)
11-1/4"
(286 mm)
2-1/2"
(64 mm)
3/4" (19 mm)
19"
(483 mm)
30" (762 mm)
60" (1524 mm)
1-1/2"
Bath Drain
Integral Flange
Detail
1-1/4"
(32 mm)
*24"
(610 mm)
*10"
(254 mm)
20-1/4"
(514 mm)
1-1/4"
(32 mm)
5-5/8"
(143 mm)
3-1/2"
(89 mm)
7/8"
(22 mm)
14-1/2"
(368 mm)
11-3/4"
(298 mm)
3-3/16"
(81 mm)
User Interface
Control Amplifier
Product Diagram
ARCHER
®
ARCHER
®
5’ VIBRACOUSTIC
®
BATH WITH INTEGRAL APRON
Page2of2
1214513-4-
A