Specification

*Recommended User
Installation NotesTechnical Information
Install this product according to the installation
guide.
All measurements are approximate only.
3-Wall AlcoveInstallation:
Right Drain Location:
Ensure that the interface, amplifier, and
transducers are functional before completing the
installation.
45-1/8" x 19-11/16" (1146 mm x 500 mm)Basin area, bottom:
52-1/8" x 22-1/16" (1324 mm x 560 mm)Basin area, top:
108 lbs (49 kg)Weight:
Control amplifier fits 16" (406 mm) center studs.
25’ (7.6 m) cables are included.
15-1/8" (384 mm)Water depth:
57 gal (215.8 L)Water capacity:
Locate the bath within 24" (610 mm) of a
GFCI-protected 120 V, 15 A grounded electrical
Amplifier: 120 V, 50/60 Hz, 15 W
Heater: 120 V, 1.1 A, 60 Hz, 65 W
Electrical rating:
outlet. A second grounded outlet within the wall
50 lbs/ft² (244.1 kg/m²)Minimum floor load:
framing must be within 24" (610 mm) of the
Required Electrical Service
planned control amplifier. One electrical service
Dedicated circuit required, protected with Class A Ground-Fault
Circuit-Interruptor (GFCI) or Residual Current Device (RCD).
may be used for the entire bath and related
electrical components.
120 V, 15 A, 50/60 HzAmplifier, Heater:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
10-4-2013 16:30
Archer
®
5’ VibrAcoustic
®
Bath with Bask
™
Heated Surface
K-1947-VBRW