Specification

Technical Information
Fixture*:
Bathing well
Basin area, bottom 50-3/8″ (1280 mm) x
19-5/8″ (498 mm)
Basin area, top 57-5/16″ (1456 mm) x
24-1/16″ (611 mm)
Weight 80 lbs (36.3 kg)
To overflow
Water depth 15-5/16″ (389 mm)
Capacity 66 gal (248.3 L)
* Approximate measurements for comparison only.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 45 lbs/square foot (218 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
1-1/2"
Bath Drain
66" (1676 mm) 32" (813 mm)
3/4" (19 mm)
2-1/2"
(64 mm)
11-1/4"
(286 mm)
16"
(406 mm)
4-1/8"
(105 mm)
19"
(483 mm)
1-1/4"
(32 mm)
No change in measurements if connected
with drain illustrated. (K-7272)
Lumbar
Angle 24˚
1/2" (13 mm) R.
1-1/4"
(32 mm)
Integral Flange
Detail
Product Diagram
ARCHER
®
ARCHER
®
5.5’ BATH WITH INTEGRAL APRON
Page2of2
1208005-4-
A