Specification

(483 mm)
Notes
Required Electrical Service
Install this product according to the installation
guide.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Locate a GFCI-protected 120 V, 15 A, grounded
duplex electrical outlet within 24" (610 mm) of the
120 V, 15 A, 60 HzBlower, Heated
Surface:
bath junction box. A 40" (1016 mm) cable is
included.
Technical Information
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
All product dimensions are nominal.
Drop-inInstallation:
ReversibleDrain location:
This product is designed for a drop-in installation
only. It is not suited for use in a three-wall alcove
with an overhead shower.
50-3/8" x 19-5/8" (1280 mm x 498 mm)Basin area, bottom:
57-5/16" x 24-1/16" (1456 mm x 611 mm)Basin area, top:
95 lbs (43.1 kg)Weight:
Will comply with ADA when installed per Section
607 Bathtubs of the 2010 ADA Standards for
Accessible Design.
45.7 lbs/ft² (223.1 kg/m²)Minimum floor load:
15-5/16" (389 mm)Water depth:
66 gal (249.8 L)Water capacity:
ADA compliant when installed to the specific
requirements of these regulations.
Drop-in, 64-1/2" x 30-1/2" (1638 mm x
775 mm)
Cutout:
Blower: 120 V, 10 A, 60 Hz, 300 W
Heated Surface: 120 V, 0.5 A, 60 Hz
Electrical rating:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
5-9-2015 08:30
Archer
®
5.5' Bath with Heated Surface
K-1949-GW