Specification

Technical Information
Fixture*:
Bathing well
Basin area, bottom 50-3/8″ (1280 mm) x
19-5/8″ (498 mm)
Basin area, top 57-5/16″ (1456 mm) x
24-1/16″ (611 mm)
Weight 120 lbs (54.4 kg)
To overflow
Water depth 15-5/16″ (389 mm)
Capacity 66 gal (248.3 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7
Heater: kW V Hz A
1.5 120 60 12.5
Required Electrical Service
Two dedicated circuits required, each protected with
Class A Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Pump is supplied with 24″ (610 mm) grounding-type plug-in
cord.
Floor support under this product must provide for a minimum
of 47 lbs/square foot (232 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
1-1/2"
Bath Drain
66" (1676 mm) 32" (813 mm)
3/4" (19 mm)
2-1/2"
(64 mm)
11-1/4"
(286 mm)
16"
(406 mm)
4-1/8"
(105 mm)
19"
(483 mm)
1-1/4"
(32 mm)
No change in measurements if connected
with drain illustrated. (K-7272)
1-1/4"
(32 mm)
Integral Flange
Detail
Lumbar
Angle 24˚
1/2" (13 mm) R.
Product Diagram
ARCHER
®
ARCHER
®
5.5’ BATH WHIRLPOOL WITH HEATER
Page2of2
1208013-4-
A