Specification

Technical Information
Fixture*:
Bathing well
Basin area, bottom 50-3/8″ (1280 mm) x
19-5/8″ (498 mm)
Basin area, top 57-5/16″ (1456 mm) x
24-1/16″ (611 mm)
Weight 120 lbs (54.4 kg)
To overflow
Water depth 15-5/16″ (389 mm)
Capacity 66 gal (248.3 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7
Pump is supplied with 24″ (610 mm) grounding-type
plug-in cord.
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum
of 47 lbs/square foot (232 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
1-1/2"
Bath Drain
66" (1676 mm) 32" (813 mm)
3/4" (19 mm)
2-1/2"
(64 mm)
11-1/4"
(286 mm)
16"
(406 mm)
4-1/8"
(105 mm)
19"
(483 mm)
1-1/4"
(32 mm)
No change in measurements if connected
with drain illustrated. (K-7272)
1-1/4"
(32 mm)
Integral Flange
Detail
Lumbar
Angle 24˚
1/2" (13 mm) R.
Product Diagram
ARCHER
®
ARCHER
®
5.5’ BATH WHIRLPOOL
Page2of2
1208009-4-
A