Dimensions Guide

1-1/2"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
Three dedicated circuits required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzPump:
120 V, 15 A, 60 HzBlower:
120 V, 15 A, 60 HzHeater:
ADA compliant when installed to the specific
requirements of these regulations.
Technical Information
All product dimensions are nominal.
Drop-inInstallation:
EndDrain location:
50-3/8" x 19-5/8" (1280 mm x 498 mm)Basin area, bottom:
57-5/16" x 24-1/16" (1456 mm x 611 mm)Basin area, top:
146 lbs (66.2 kg)Weight:
49 lbs/ft² (239.2 kg/m²)Minimum floor load:
15-5/16" (389 mm)Water depth:
66 gal (249.8 L)Water capacity:
Pump: 120 V, 7 A, 60 Hz
Blower: 120 V, 10 A, 60 Hz
Heater: 120 V, 12.5 A, 60 Hz, 1500 W
Electrical component
rating:
SinglePump speed:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-28-2018 10:12
Archer
®
5.5' BubbleMassage
™
Whirlpool Bath
K-1949-XHG