Installation Guide

8. Connect the Cables

Route the bound transducer cables to the control ampliﬁer location. Drill 1″ (52 mm) holes where

needed.

If equipped, route the chromatherapy cable to the planned ampliﬁer location. Follow the same route

as the transducer cables.

Route the inter-connect cable to the control ampliﬁer location. Include a drip loop.

Route the user interface cable to the planned user interface location. Include a drip loop.

NOTE: An auxiliary cable connection can be used to pair a BLUETOOTH

device or other

battery-operated audio device so users can play their own music with the vibracoustic bath.

If used, route an auxiliary-in cable (not included) to the control ampliﬁer location.

Chromatherapy

Cable (If Equipped)

Optional Auxiliary-In

Cable

Transducer Wires

Inter-Connect

Cable

Heated Surface

Control

Transducer

User Interface

Kohler Co. 13 1237790-2-C