Specification Sheet

*
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Install this product according to the installation
instructions.
120 V, 15 A, 60 HzHeated Surface,
Amplifier:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Technical Information
All product dimensions are nominal.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
FreestandingInstallation:
CenterDrain location:
Control amplifier fits 16" (406 mm) center studs.
25’ (7.6 m) cables are included.
45-3/4" x 24-7/8" (1162 mm x 632 mm)Basin area, bottom:
54-7/8" x 29-3/16" (1394 mm x 741 mm)Basin area, top:
Provide a separate grounded outlet if connecting
to a powered wireless device or adapter.
91 lbs (41.3 kg)Weight:
40.4 lbs/ft² (197.3 kg/m²)Minimum floor load:
16" (406 mm)Water depth:
72.6 gal (274.8 L)Water capacity:
Footprint, 1244408-7, not required, not
included
Template:
Heated Surface: 120 V, 0.5 A, 50/60 Hz,
65 W
Amplifier: 120 V, 1.1 A, 50/60 Hz
Electrical component
rating:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-7-2017 06:25
Sunstruck
®
5.5' VibrAcoustic
®
Bath
K-1967-VBW