Rough-In Guide

Product Information
Applicable product:
Cube bath with Bask heated surface K-1968-W1
Fixture*:
Bathing well:
Basin area, bottom 39-3/8″ (1000 mm) x
39-3/8″ (1000 mm)
Basin area, top 44-5/8″ (1134 mm) x
44-5/8″ (1134 mm)
Weight 110 lbs (49.9 kg)
To overflow:
Water depth 27-1/2″ (699 mm)
Capacity 171 gal (647.3 L)
* Approximate measurements for comparison only.
Drop-in cut-out 47″ (1194 mm) x 47″ (1194 mm)
Heater: W V HZ A
65 120 60 1.1
Installation Notes
Install this product according to the installation guide.
Locate the bath within 24″ (610 mm) of a GFCI-protected,
120 V, 15 A, grounded electrical outlet.
Floor support under bath must provide for a minimum of 105
lbs/square foot (513 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to CSA B45.5/IAPMO Z124. All dimensions
are nominal.
34"
(864 mm)
48" (1219 mm)
1" (25 mm)
1-5/8"
(41 mm)
1-1/2" OD
3-1/2"
(89 mm)
No change in measurements if connected
with drain illustrated. (K-8150)
24"
(610 mm)
48"
(1219 mm)
24"
(610 mm)
29"
(737 mm)
Access Panel
30" (762 mm) L x 15" (381 mm) H Min
3-7/8"
(99 mm)
Roughing-In
K-1968-W1
UNDERSCORE
TM
CUBE BATH WITH BASKTM HEATED SURFACE
UNDERSCORETM CUBE BATH WITH BASKTM HEATED SURFACE
1196038-1-
A