Specification

Technical Information
Fixture*:
Basin area 19-11/16″ (50 cm) x 12-7/16″
(31.6 cm)
Water depth 2-1/8″ (5.4 cm) without overflow
9/16″ (1.4 cm) to overflow
Drain hole 1-3/4″ (4.4 cm) D.
* Approximate measurements for comparison only.
Included component
Cut-out template 1066138-7
Installation Notes
Install this product according to the installation guide.
Product K-2353 is less overflow, K-2354 is with overflow.
IMPORTANT! Product rests on a countertop. Consider height
of product when designing installation.
Choose a faucet that will provide adequate clearance and will
direct the water stream to the center of the lavatory.
When installing a pop-up drain to this lavatory, it may be
necessary to bend the drain linkage to allow proper reach to
the faucet lift rod.
NOTICE:The countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current
cut-out template provided by Kohler (1-800-43-FOCUS).
Kohler is not responsible for cutout errors when an incorrect
cut-out template is used.
17-3/16" (43.7 cm)
K-2353-1
K-2353-4K-2353-8
21-5/16" (54.1 cm)
20-3/16" (51.3 cm)
1-1/4" OD
3/8" Cold
4" (10.2 cm)
4" (10.2 cm)
4" (10.2 cm)
3/8" Hot
14"
(35.6 cm)
9"
(22.9 cm)
3-7/16"
(8.7 cm)
3-7/16"
(8.7 cm)
3-7/16"
(8.7 cm)
4-1/16"
(10.3 cm)
9-3/4"
(24.8 cm)
4-1/8"
(10.5 cm)
18-1/16"
(45.9 cm)
24" (61 cm)
11"
(27.9 cm)
8" (20.3 cm)
Min
9" (22.9 cm)
Min
27"
(68.6 cm)
Min
34"
(86.4 cm)
Recommended ADA Installation
Product Diagram
YIN-YANG
®
YIN-YANG
®
WADING POOL
®
LAVATORY
Page2of2
1073814-4-
C