Dimensions Guide

Features

•

Single lever design with lock screw.

•

Built-in check valves prevent migration of hot water to cold and

cold water to hot water piping.

•

Safe Drinking Water Act (Lead) compliant.

Material

•

Solid brass construction ensures years of reliable service.

Installation

•

Installs easily between the stop valves and faucet.

Included Components

Additional Components:

Compression sleeves

Nuts

Codes/Standards

NSF/ANSI 61

NSF/ANSI 372

All applicable US Federal and State material

regulations

KOHLER

One-Year Limited Warranty

See website for detailed warranty information.

Available Colors/Finishes

Color tiles intended for reference only.

DescriptionCodeColor

Rough PlateRP

1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

6-27-2019 05:44 - US/CA/MX

Mechanical mixing valve

K-24154

PAGE 1
Mechanical mixing valve K-24154 Features • • • Single lever design with lock screw. Built-in check valves prevent migration of hot water to cold and cold water to hot water piping. Safe Drinking Water Act (Lead) compliant. Material • Solid brass construction ensures years of reliable service. Installation • Installs easily between the stop valves and faucet.
PAGE 2
Mechanical mixing valve K-24154 2-7/16" (62 mm) Technical Information All product dimensions are nominal. Faucet: Flow rate: Pressure: 3.5 gal/min (13.2 l/min) 60 psi (4.1 bar) Valve body: Drain included: Cast brass No Notes Install this product according to the installation guide. 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com.