Dimensions Guide

Tools and Materials
Before You Begin
CAUTION: Risk of personal injury. Handle this product
with care. Vitreous china can break or chip if the product is
handled carelessly.
NOTE: Roughing-in remains the same when using the optional 3″
outlet spud.
Observe all local plumbing and building codes.
Refer to local codes and manufacturer’s instructions for flush
valve requirements.
Carefully inspect the new urinal for damage.
Fixture dimensions are nominal and conform to tolerances by
ASME Standard A112.19.2/CSA B45.1.
Site preparation may require additional tools and hardware.
Adjustable
Wrench
Safety
Glasses
Tape
Measure
Thread
Sealant
Levels
Assorted
Screwdrivers
Pencil
• Hole Cutting Equipment
Plus:
1/4" Ratchet
5/8" Wrench
1267569-2-A 2 Kohler Co.